Perma-Cote Installation

Return to Perma-Cote's Rigid Coated Conduit Home Page

Perma-Cote Coated Conduit
is ISO Certified.

Perma-Cote PVC-coated galvanized rigid conduit and fittings provide unequaled corrosion protection. Manufactured in the U.S.A., ISO 9001-certified Perma-Cote complies with all standards mandated by UL6, NEMA RN-1 and ANSI C80.1. Plus --- Perma-Cote is ETL-Verified for product performance and reliable longevity ten or more times longer than brands that are not ETL-Verified. Look for the combined ETL/UL label to be sure you are receiving the protection you've paid for!

NEW!
Customer Satisfaction:
Online Literature Request Form

CUTTING We recommend using a roller cutter to cut coated conduit. In addition to producing a square cut end, the roller cutter will remove approximately 1/4" of the PVC coating, aiding in conduit threading. Conventional manual or power saws may also be used to cut conduit. Use a reamer to remove any rough edges from the conduit interior caused by the cutting operation. This ensures that the wire pulled through the conduit will not be damaged. Perma-Cote... you can install it and forget it. Clamping \| Cutting \| Threading \| Bending \| Assembly	We recommend that Perma-Cote conduit be cut with a roller cutter.
	The PVC coating may need to be pencil cut in order that the die teeth may engage the conduit.
	Use a reamer to remove rough edges.

PERMA-COTE COATED CONDUIT • 1100 US Highway 271 South, Gilmer, Texas 75644 • Phone: 903/843-4388 • Fax: 903/843-2516

CUTTING